제품소개
Hydraulic
VALVE
Wandfluh
WWMFA10
- Flange construction
- 4/3-way with spring centred mid position
- 4/2-way with spring reset
- Qmax = 120 l/min
- pmax = 350 bar
Wandfluh
BM3204, BM2204
- 32/2-, 3/2- and 3/4-way
- normally open and normally closed
- Qmax = 15 l/min
- pmax = 350
Wandfluh
ZS22101
- 2/2-way
- normally open and normally closed
- Q max = 80 l/min
- p max = 350 bar
Wandfluh
WDMFA06
- 4/2-way impulse execution, detented
- 4/3-way with spring centred mid position
- 4/2-way with spring reset
- Qmax = 80 l/min
- pmax = 350 bar
Wandfluh
WDPFA06
- Qmax = 42 l/min
- 4 volume flow levels
- QN max = 32 l/min
- pmax = 350 bar
Wandfluh
WDPFA10
- Flange construction
- Qmax = 100 l/min
- QN max = 65 l/min
- pmax = 350 bar
Wandfluh
AURDA
- Sandwich construction
- Qmax = 70 l/min
- QN = 40 l/min
- pmax = 350 bar
Wandfluh
제품에 대한 설명 20글자 내외 제품에 대한 설명 20글자 내외
- 제품의 대표적인 특징 1
- 제품의 대표적인 특징 2
- 제품의 대표적인 특징 3
Hydac
DB4E-01X
- 전체 유량 범위에서 뛰어난 안정성
- 폭넓은 조정이 가능한 다양한 압력 범위(최대 630bar 고압)
- 부식 방지 강화를 위해 아연-니켈 도금된 노출 표면
(1.000시간 염수 분무 테스트)
Hydac
KHP-10
- Operating fluids: Mineral oil to DIN 51524 Part 1 and Part 2 (other fluids on request)
- Temperature of operating fluid: -10 °C to +80 °C
- No orientation restrictions
Hawe
CMV , CSV, CMVZ, CSVZ
- Operating pressures up to 500 bar
- Various adjustment options
- Easily produced mounting hole
Hawe
MPV6C-
- Operating pressures up to 700 bar
- Various adjustment options
- Numerous configurations
Hawe
MVPX
- Operating pressures up to 450 bar
- Easily produced mounting hole
- Safety valve for accumulators in oil-hydraulic systems
Hawe
MVEX
- Operating pressures up to 450 bar
- Easily produced mounting hole
- Safety valve for accumulators in oil-hydraulic systems
Hawe
EPM-21
- Zero leakage in closed switching position
- Directly switching up to approx. 3 l/min and with pilot-controlled switching up
to 160 l/min - Low Flow resistance even at high Flow rates
Hawe
Accumulator charging valves
LV20, LV25
- Operating pressures up to 350 bar
- Flow Qmax = 25 lpm
- Spool type valve
Hawe
check valve
type BC
- Screw-in valve
- Operating pressure pmax 700 bar
- Flow rate Qmax 60 lpm
Hawe
Directional seated valves
PS-2-3-PYD
- Pressure pmax = 350…500 (700) bar
- Flow Qmax = 6…65 lpm
Bucher
DVPA-1-10
- poppet pilot stage, spool main stage
- Size 10 mm nominal size, BUCHER cavity type DC
- Operating pressure… 350 max. in A and B
Bucher
DRPA-5-10
- pressure reducing cartridge valve
- Mounting method : screw-in cartridge (M24 x 1,5)
- Operating pressure pmax … 350 in A, B and Z
Bucher
DWPBU-2-10
- pressure unloading cartridge valve
- Mounting method : screw-in cartridge M24x1.5
- Maximum operating pressure 315bar
- Maximum flow rate 60l/min
Bucher
WK220NA
- Screw-in cartridge valve
- High pressure wet-armature solenoids
- The slip-on coil can be rotated, and it can be replaced
without opening the hydraulic envelope
Bucher
RKVG
- Screw-in cartridge valve
- No soft seal, thus not depending on temperature and
pressure fluid - Virtually leak-proof in closed condition
Bucher
RKVE
- Screw-in cartridge valve
- No soft seal, thus not depending on temperature and
pressure fluid - Virtually leak-proof in closed condition
SUN Hydraulics
PRDBLAN
- Maximum Operating Pressure 5000psi
- pressure reducing/relieving valve
- 500 – 3000 psi (35 – 210 bar), 700 psi (50 bar) Standard Setting
SUN Hydraulics
NFCDLFN /NFCDKFN
- Maximum Operating Pressure 5000psi
- Fully adjustable needle valve
SUN Hydraulics
NFCDKFN
- Maximum Operating Pressure 5000psi
- pressure reducing/relieving valve
- 500 – 3000 psi (35 – 210 bar), 700 psi (50 bar) Standard Setting
Pister
BKH-
- Sealing: plastics, metal
- Pressure range: up to PN500 (note table of dimensions)
- Temperature range: standard: -20°C to +80°C (-4 to +176°F)
